Automatic Lane Dividing Door System in Office Building

1, Introducing the automatic lane dividing door system

1.1, What is an automatic lane dividing door system?

Automatic lane dividing door system can basically be understood as a security control system installed at entrances and exits. For the purpose of controlling pedestrians entering and leaving that area. At the same time, the management department can easily track access activities in controlled areas.

Automatic lane dividing doors can integrate with other authentication devices such as facial recognition, fingerprint or magnetic card. The purpose is to divide lanes, control and promptly prevent unauthorized people from intentionally passing through the lane separation gate area, creating a comprehensive security system. Lane separation door is installed right at the entrances and if users want to enter or exit this area, they must verify the validity, then the door will automatically open for the user to pass.

Lane separation door is designed with waterproof, dust-proof, rust-proof design and dual contact surface treatment technology, easy to integrate with other writing/reading devices. Therefore, the greatest effectiveness of this system is lane division in areas with a large flow of people entering and exiting and controlling each individual at the entrance to the controlled area.

1.2, Principle of operation

– Lane dividing doors will usually be installed at entrances in the lobby, near elevators or stairs... With the main purpose of controlling security for people entering and leaving these areas.

– The touch card reader will authenticate the user's information as they pass by. At the same time, transmit a signal to automatically open the door if the card is confirmed to be valid. Therefore, if you want to enter or exit, you must use a card to be able to enter and exit these places.

– Lane gates will use access control by card, fingerprint or face. So each person entering or working here will be given a card or set up with their fingerprint and face. Card, fingerprint or face for each entry and exit, the user will swipe the card at the reader. At this point, the system will process and authenticate the information. If valid, the door automatically opens.

– Entrance and exit events are managed with the purpose of serving the different needs of each unit.

1.3, System diagram

Basic equipment:

– Contactless card reader set

– Automatic door system: Flap barrier, Tripod, Swing Gate, Barrier…

– Central controller and management software.

1.4, Types of automatic lane dividing doors

a, Swing gate

Swing gate is suitable for use in applications automatic lane dividing door system

– The gate body is made from a special material that is sturdy, beautiful and durable. Guaranteed to resist force and weather impacts. Standard against rust or vibration.

– Engine and control system operates stably

– Barrier made of mica or glass with customizable sizes and folds when activated.

– Highly aesthetic. With an arm design made of mica or transparent glass, overall, the door is quite eye-catching and luxurious for the area of ​​use.

b, Flap gate

Flap gate is easily identifiable thanks to its control door the two wings slide to the sides when opened. Arm shapes such as: fan wings or rectangular wings. Anyone who wants to enter or exit this door needs to authenticate on the reader, then the door will retract on both sides to let that person through and close as soon as that person has passed.

The body of the Flap door pillar is usually made from shiny 304 stainless steel. Highly appreciated for its sophisticated design with many highlights and delicate embossed edges.

Flap gates often support more luxurious LED display lights. Helping users easily observe the flow and exact status of the control door, the top, front and rear of the flap gate are equipped with appropriate LED lights.

They easily integrate with a variety of authentication readers such as magnetic card, fingerprint, and face readers.

c, Tripod Turnstile Door

Tripod turnstile doors, also known as three-pronged swing doors, are doors with sturdy turning handles. Tripod swing gate This uses 1-way or 2-way swing doors; depending on the owner's needs. In case of power outage, the doors will automatically retract for easy escape. At this time, control support from security guards is needed. Compared to other types of automatic gates, this swing gate has an intelligent control system. Installation and maintenance costs are also lower. That is the reason why this type of swing gate is recommended by many experts.

2, Benefits of automatic lane dividing door systems in office buildings

– Lane dividing doors in the system in particular and the access control system in general bring high security, modernity and more professionalism.

– The system only grants access permission to each authorized person.

– Control all areas such as building lobby, shopping center, amusement park...

– In the case of visitors, when wanting to pass through the door, you must notify the receptionist or manager. To be granted access at a certain time.

– The system operates stably and safely for users.

– Considered an extremely safe and effective door control solution.

– Highly secure system:

+ There is an open button in case of emergency or when experiencing a power outage

+ Safe and luxurious blackout curtain

+ Can control accompanying children

+ User-friendly

3, Recommended products

Automatic lane-separating security doors are increasingly sought after by many units because of the benefits and operational efficiency this system brings. Meanwhile, manufacturers also research and improve products that are more suitable for each customer's needs. Faced with a series of Swing, Tripod or Flap products... from many different brands such as ZKTeco, MAG, Turboo, Shenzen, Fujica..., some products are still the preferred choice. Some models can be seen as: Model SBTL5000 Series; SBTL2011; SBTL5200 Series; SBTL6000; SBTL300; SBTL3000; SBTL8200….

4, Easynet provides automatic lane dividing door system solutions in office buildings

Easynet is proud to be a reputable supplier and installer of access control equipment. Including access control systems with automatic lane dividing doors such as: Flap barrier; Swing Gate; Tripod... All equipment is imported genuine, complete units from leading manufacturers in Italy, Malaysia, Taiwan, etc.