Push button activates KAC gas discharge
Product code:
MCP1A
KAC air release trigger button operated manually
Contact us
Liên hệ ngay
- Product code: MCP1A
- Brand: KAC
- Origin: UK
- KAC gas release activation button is a device in the automatic fire extinguishing system. When this button is activated, the cabinet will alarm the fire and count down to release the gas. The countdown process depends on how we install the cabinet (fire alarm center).
- Manual air release trigger button is installed in front of the entrance/exit door of the area to be protected, or placed in the room to be protected. To avoid unintended impact, the manual trigger button must be double-action, meaning it requires two operations to operate the system. Manually operated push buttons are electrically operated and monitored by the fire control panel. The operation of the manual push button is the same as if the system had two different detectors being affected.
- Device type: Glass (Break Glass)
Usage environment
: Indoor
Protection level
: IP24D
Circuit configuration
: Single contactor
Contact parameters
: 3A @240 VAC or 3A @24VDC
Working temperature
: -100C – 550C - Learn more about fire protection equipment
- KAC delay push button Smoke detector Heat detector Fire alarm bell Fire alarm siren/light…
Chưa có tài liệu tải về
Conference room audio configuration: 29 Bosch CCS 1000 microphones
– Power consumption: 1.3 W – Frequency response: 30 Hz to 20 kHz (Power system) – THD: <0.5% – S/N: >93 dBA – Sampling rate: 44.1 kHz – Headphone load impedance: >32 ohms <1k ohm – Maximum speaker peak output power: 4 W – Nominal speaker output: 72 dB SPL – Participant speaker frequency response: 200 Hz to 16 kHz (Audio) – Microphone polar pattern: Cardioid – Participant microphone frequency response: 125 Hz to 15 kHz – Nominal microphone input: 85 dB SPL
Audio configuration of 24-microphone Aplus meeting room
– Dimensions: 150 x 135 x 53 mm – Input voltage: DC 9V – Input impedance: 1 KΩ – S/N ratio: > 90 dB – Reference to speech: Gooseneck length – Gooseneck length: 520 mm – Weight: 1 kg – Connection cable: 2 meters, 8 cores
Configuration of 80m2 meeting room sound system
Equipment for 80m2 meeting room sound system configuration includes: 1 FLB FT-606 Wall Mount Speaker 4 Pieces 2 FLB LS-250 Amplifiers 1 Piece 3 FLB F92 wired desktop gooseneck microphone 1 Piece 4 ACS GD66 wireless microphones 1 Set
0888 422 786