- Model: TS1200 Pro Series
- LED Indicator: LED Solid Green = Open Solid Red = Closed
- Sound Indicator: Built-in buzzer
- Aisle Width (mm): 550mm
- Arm Movement Type: Rotation (tripod)
- Fork Arm Length: 500mm
- Base Size: 605 × 252mm
- Cover Material: SUS304 stainless steel
- Cover Options: Rounded design (supports device mounting)
- Optional Lid Authentication Method: Fingerprint; RFID
- Body Material: SUS304 stainless steel (T=1.2mm)
- Body color: Silver/gray
- Fork arm material: SUS304 stainless steel
- Main Board Function: Set arm drop time; Configure access mode
- Board Interface: Fire alarm port (relay) *1; RS485 port *1
- Controller: C3-200 Plus (recommended); Inbio 260 Pro Plus or third party controller depending on tripod body space
- Reader Options: Under-cover RFID reader: ProID 10/ KR series Under-cover fingerprint reader: FR200 / FR1500
- Traffic Speed: RFID: 25 people/minute; Fingerprint: 20 people/minute
- Target Users: Adults; Children (with supervision); People with disabilities (with support)
- Power Supply: 110V / 220V AC ±10% 50/60Hz; DC 12V
- Operating Capacity: 10VA (Standby); 40VA (Operating)
- Fire Alarm Signal: Dry contact input
- Noise Level: Less than 60dB
- MTTR: Under 60 minutes
- MCBF: 2 million times
- Net Weight: Gross weight: 85kg; Net weight: 65kg
- Dimensions (DRC): 1374 × 606 × 992mm
- Packaging Dimensions (DRC): 470 × 750 × 1100mm
- Operating Temperature: -20°C to 70°C
- Operating Humidity: 0% to 80% RH (non-condensing)
- Certification: CE, FCC
- Protection Level: Meets IPX4 waterproof standard (internal test results)
- Software: ZKBio CVAccess / ZKBio CVSecurity (expand access control functions)
- Safety Level: Self-locking tripod when authentication fails; lower the gear when the power goes out
- Security Features: Anti-tailgating
- Delivery Status: Pre-assembled
- Application Environment: Indoor / covered outdoor
- Floor Requirements: Finished flat floor (optional base for unfinished floors)
- Security Level: Medium
- Emergency Mode: Support (lower the forks)
- Packaging Materials: Wooden crates (standard)
Chưa có tài liệu tải về
- Energy consumption: 1.3 W - Regular response:30 Hz to 20 kHz (Electrical system) - THD: 93 dBA - Sampling rate: 44.1 kHz - Headphone load impedance: > 32 ohms < 1k ohm - Maximum speakers. - peak output power:4 W - Nominal speaker output:72 dB SPL - Participant speaker frequency response: 200 Hz to 16 kHz (audio) - Microphone polar pattern: Cardioid
- Dimensions: 150 x 135 x 53 mm - Input voltage: DC 9V - Input impedance: 1 KΩ - S/N ratio: > 90 dB - Reference to speech: Goose neck length - Gooseneck length: 520 mm - Weight: 1 kg - Connection cable: 2 meters, 8 cores
- Equipment for 80m2 meeting room sound system configuration includes: - 1. - FLB FT-606 wall-mounted speaker - 2. - FLB LS-250 Amplifier - 3. - FLB F92 wired desktop gooseneck microphone - 4. - ACS GD66 wireless microphone
0888 422 786