Fire Delay Push Button VES / Abort Switch
Product code:
VF1823-10
- The delay button is located near the manual action button.
- To avoid unintended operation, the push button must be operated by hand
- double impact type, meaning it takes two operations to impact the system.
- The delay button must be monitored by the control cabinet and indicate trouble if it occurs
- pressed, no alarm failure.
- Its function is to delay the activation of the fire extinguishing system.
- To avoid unintended operation, the push button must be operated by hand
- double impact type, meaning it takes two operations to impact the system.
- The delay button must be monitored by the control cabinet and indicate trouble if it occurs
- pressed, no alarm failure.
- Its function is to delay the activation of the fire extinguishing system.
Contact us
Liên hệ ngay
Fire Delay Push Button VES / Abort Switch
- Product code: VF1823-10
- Brand: VES
- Origin: USA
- VES fire delay push button
- VES fire delay push button located near the manually operated push button.
- To avoid unintended impact, the manual push button must be double-action, meaning it requires two operations to operate the system.
- The delay button must be monitored by the control cabinet and indicate trouble if pressed, no alarm problems.
- Its function is to delay the activation of the fire suppression system.
- Learn more about other devices
- KAC delay button
- Smoke detector
- Heat detector
- Fire alarm
- Fire siren/light…
Chưa có tài liệu tải về
ZKTeco Saturn-S1000 Pro Swing Barrier
- Saturn-S1000 Pro is a ZKTeco swing barrier for pedestrian access control. - A brushless DC motor moves the barrier in about one second per movement. - Optional readers support facial authentication, RFID and QR codes. - Six pairs of infrared sensors are standard; eight pairs are optional. - The barrier unlocks during a power failure or when a fire alarm is triggered. - The standard lane is 650 mm wide; 1000 mm and 1200 mm are optional.
Meeting Room Sound Configuration 29 Bosch CCS 1000 Microphones
- Energy consumption: 1.3 W - Regular response:30 Hz to 20 kHz (Electrical system) - THD: 93 dBA - Sampling rate: 44.1 kHz - Headphone load impedance: > 32 ohms < 1k ohm - Maximum speakers. - peak output power:4 W - Nominal speaker output:72 dB SPL - Participant speaker frequency response: 200 Hz to 16 kHz (audio) - Microphone polar pattern: Cardioid
Aplus 24 Microphone Meeting Room Sound Configuration
- Dimensions: 150 x 135 x 53 mm - Input voltage: DC 9V - Input impedance: 1 KΩ - S/N ratio: > 90 dB - Reference to speech: Goose neck length - Gooseneck length: 520 mm - Weight: 1 kg - Connection cable: 2 meters, 8 cores
0888 422 786